IMB-H810-i2 microATX MotherboardPage 514.1 Anti-static PrecautionsWARNING:Failure to take ESD precautions during the installation of theIMB-H810-i2 may result in permanent damage to the IMB-H810-i2 andsevere injury to the user.Electrostatic discharge (ESD) can cause serious damage to electronic components,including the IMB-H810-i2. Dry climates are especially susceptible to ESD. It is thereforecritical that whenever the IMB-H810-i2 or any other electrical component is handled, thefollowing anti-static precautions are strictly adhered to. Wear an anti-static wristband: - Wearing a simple anti-static wristband canhelp to prevent ESD from damaging the board. Self-grounding:- Before handling the board touch any grounded conductingmaterial. During the time the board is handled, frequently touch anyconducting materials that are connected to the ground. Use an anti-static pad: When configuring the IMB-H810-i2, place it on anantic-static pad. This reduces the possibility of ESD damaging theIMB-H810-i2. Only handle the edges of the PCB:-: When handling the PCB, hold the PCBby the edges.4.2 Installation ConsiderationsNOTE:The following installation notices and installation considerations shouldbe read and understood before installation. All installation notices mustbe strictly adhered to. Failing to adhere to these precautions may leadto severe damage and injury to the person performing the installation.
