IEI Technology ITG-100-AL User Manual

Contents

ITG-100-AL Embedded SystemPage 223.6 Additional Block Layer InstallationNOTE:Additional block layer can be assembled to achieve I/O interfaceexpansion and data storage requirement. With choices of adding a 2.5”SATA HDD/SSD bay, a knockout-hole layer with selectable I/Ointerface, or both of above-mentioned options, the ITG-100-AL couldbe modularized to what best fit users’ preferences and still remainingits compact size.To install the additional block layer, please follow the steps below:Step 1: Remove the bottom panel by removing the two retention screws from the bottompanel (Figure 3-11).Figure 3-11: Remove the Bottom Panel (ITG-100-AL-E1/S)Step 2: Install the additional block layer by securing the four retention screws.(Figure 3-12).