ITG-100-AL Embedded SystemPage 84B.2 Maintenance and Cleaning PrecautionsWhen maintaining or cleaning the ITG-100-AL, please follow the guidelines below.WARNING: For safety reasons, turn-off the power and unplug the panel PCbefore cleaning. If you dropped any material or liquid such as water onto the panelPC when cleaning, unplug the power cable immediately and contactyour dealer or the nearest service center. Always make sure yourhands are dry when unplugging the power cable.B.2.1 Maintenance and CleaningPrior to cleaning any part or component of the ITG-100-AL, please read the details below. Except for the LCD panel, never spray or squirt liquids directly onto any othercomponents. To clean the LCD panel, gently wipe it with a piece of soft drycloth or a slightly moistened cloth. The interior of the device does not require cleaning. Keep fluids away from thedevice interior. Be cautious of all small removable components when vacuuming the device. Never drop any objects or liquids through the openings of the device. Be cautious of any possible allergic reactions to solvents or chemicals usedwhen cleaning the device. Avoid eating, drinking and smoking within vicinity of the device.B.2.2 Cleaning ToolsSome components in the ITG-100-AL may only be cleaned using a product specificallydesigned for the purpose. In such case, the product will be explicitly mentioned in thecleaning tips. Below is a list of items to use when cleaning the ITG-100-AL. Cloth– Although paper towels or tissues can be used, a soft, clean piece ofcloth is recommended when cleaning the device. Water or rubbing alcohol–A cloth moistened with water or rubbing alcohol
