PCISA-MARK CPU CardÎ IDE Master and IDE SlaveWhen entering setup, BIOS auto detects the presence of IDE devices. The StandardCMOS Features menu shows the status of the auto detected IDE devices. The followingIDE devices are detected and shown in the Standard CMOS Features menu: IDE Primary Master IDE Primary Slave IDE Secondary Master IDE Secondary SlaveIDE device configurations are changed or set in the IDE Configuration menu (BIOS Menu3). If an IDE device is detected, and one of the above listed two BIOS configurationoptions is selected, the IDE configuration options shown in Section 5.2.1 appear.Î Drive A [1.44M, 3.5in]Use the Drive A configuration option to specify the floppy drive type installed in thesystem. The floppy drive configuration options are: None 360K, 5.25 in. 1.2M, 5.25 in. 720K, 3.5 in. 1.44M, 3.5in (D EFAULT) 2.88M, 3.5 in.Î Drive B [None]Use the Drive B configuration option to specify the floppy drive type installed in thesystem. The floppy drive configuration options are: None (D EFAULT) 360K, 5.25 in. 1.2M, 5.25 in. 720K, 3.5 in. 1.44M, 3.5in 2.88M, 3.5 in.Page 113
