PCISA-MARK CPU CardÎ Boot Other Device [Enabled]Use the Boot Other Device option to determine whether the system uses a second orthird boot device if the first boot device is not found.Î Disabled The system does not look for second and third bootdevices if the first one is not found.Î Enabled (D EFAULT) The system looks for second and third boot devices if thefirst one is not found.Î Swap Floppy Drive [Disabled]The Swap Floppy Drive option is effective only in systems with two floppy drives.Selecting Enabled assigns physical drive B to logical drive A, and physical drive A tological drive B.Î Enabled Assigns physical drive B to logical drive A, and physicaldrive A to logical drive B.Î Disabled (D EFAULT) Default physical/logical drive assignments.Î Boot Up Floppy Seek [Enabled]Use the Boot Up Floppy Seek option to enable the BIOS to determine if the floppy diskdrive installed has 40 or 80 tracks during the POST. 360K FDDs have 40 tracks while760K, 1.2M and 1.44M FDDs all have 80 tracks.Î Disabled BIOS does not search for the type of FDD drive by tracknumber. Note that there is no warning message if thedrive installed is 360K.Î Enabled (D EFAULT) BIOS searches for a FDD to determine if it has 40 or 80tracks. Note that BIOS cannot tell the difference between720K, 1.2M or 1.44M drives as they all have 80 tracks.Page 122 IEI® Technology, Corp.
