PPC-5xxx-9455 Panel PCPage 89The Temperature Limit of Full option can only be set if the FAN x Mode Setting optionis set to Automatic Mode. Use the Temperature Limit of Full option to select the CPUtemperature at which the cooling will reach full speed. To select a value, select theTemperature Limit of Full option and enter a decimal number between 000 and 127. Thetemperature range is specified below. Minimum Value: 0°C Maximum Value: 127°CÎ Fan Start PWM [070]The Fan Start PWM option can only be set if the FAN x Mode Setting option is set toAutomatic Mode. Use the Fan Start PWM option to select the PWM the fan starts torotate with after the temperature specified in the Temperature 3 Limit of Start isexceeded. To select a value, select the Fan Start PWM option and enter a decimalnumber between 000 and 127. The temperature range is specified below. PWM Minimum Mode: 0 PWM Maximum Mode: 127Î Slope PWM [4 PWM]The Slope PWM option can only be set if the FAN x Mode Setting option is set toAutomatic Mode. Use the Slope PWM option to select the linear rate at which the PWMmode increases with respect to an increase in temperature. A list of available options isshown below: 0 PWM 1 PWM 2 PWM 4 PWM 8 PWM 16 PWM 32 PWM 64 PWM
