PPC-5xxx-9455 Panel PCPage 74Î Enhanced D EFAULT Configures the on-board ATA/IDE controller to be inEnhanced mode. In this mode, IDE channels and SATAchannels are separated. Some legacy OS do notsupport this mode.Î Configure SATA as [IDE]The “Configure SATA as” option sets the configuration of the SATA ports.Î IDE D EFAULT The SATA drives are configured as IDE devices and noenhanced functions are availableÎ Configure SATA Channels [IDE]The “Configure SATA Channels” option sets the order in which the IDE devices areconfigured.Î Before PATA D EFAULT The SATA drives are configured before the PATA drivesÎ Behind PATA The SATA drives are configured after the PATA drivesÎ Legacy IDE Channels [PATA Pri, SATA Sec]Î SATA Only Only the SATA drives are enabled.Î PATA Pri, SATA Sec D EFAULT The IDE drives are enabled on the PrimaryIDE channel. The SATA drives are enabled onthe Secondary IDE channel.Î PATA Pri., PATA Sec The IDE drives are enabled on the primaryand secondary IDE channels. SATA drivesare disabled.Î PATA Only Only the PATA drives are enabled.Î IDE Master and IDE SlaveWhen entering setup, BIOS auto detects the presence of IDE devices. BIOS displays thestatus of the auto detected IDE devices. The following IDE devices are detected and areshown in the IDE Configuration menu:
