PPC-5xxx-9455 Panel PCPage 102Î 40 Sec POST waits 40 seconds for the USB mass storagedevice after the start unit command.Î Device ##The Device## field lists the USB devices that are connected to the system.Î Emulation Type [Auto]Use the Emulation Type BIOS option to specify the type of emulation BIOS has toprovide for the USB device.NOTE:Please note that the device’s formatted type and the emulation typeprovided by the BIOS must match for a device to boot properly. If bothtypes do not match then device’s behavior is undefined. To make sureboth types match, format the device using BIOS INT13h calls afterselecting the proper emulation option in BIOS setup. The FORMATutility provided by Microsoft® MS-DOS®, Microsoft® Windows® 95,and Microsoft® Windows® 98 can be used for this purpose.Î Auto D EFAULT BIOS auto-detects the current USB.Î Floppy The USB device will be emulated as a floppy drive.The device can be either A: or B: responding toINT13h calls that return DL = 0 or DL = 1respectively.Î Forced FDD Allows a hard disk image to be connected as afloppy image. This option works only for drivesformatted with FAT12, FAT16 or FAT32.Î Hard Disk Allows the USB device to be emulated as hard diskresponding to INT13h calls that return DL values of80h or above.
