WAFER-GXPage 86Î All Errors Whenever BIOS detects a non-fatal error thesystem is stopped and the user prompted.Î No Errors The system boot is not stopped for any errorsthat may be detected.Î All, But Keyboard (Default) The system boot does not stop for a keyboarderror; it stops for all other errors.Î All, But Diskette The system boot does not stop for a diskerror; it stops for all other errors.Î All, But Disk/Key The system boot does not stop for a keyboardor a disk error; it stops for all other errors.Î Base Memory:The Base Memory is NOT user configurable. The POST determines the amount of base(or conventional) memory installed in the system. The value of the base memory istypically 512K for systems with 512K memory installed, or 640K for systems with 640K ormore memory installed.Î Extended MemoryThe Extended Memory is NOT user configurable. The BIOS determines how muchextended memory is present during the POST. This is the amount of memory above 1MBlocated in the memory address map of the CPU.Î Total MemoryThe Total Memory is NOT user configurable.5.2.1 IDE Primary Master/SlaveUse the IDE Primary Master/Slave menu (BIOS Menu 3) to set or change themaster/slave IDE configurations.
