Problem Possible cause Remedylights up on the timerdisplay.The second phase of thepower supply is missing.Check if the appliance isconnected correctly to theelectrical supply. Removethe fuse, wait for one minute,and insert the fuse again. Ifthe problem continues, en-sure a correct installation bycalling an authorised instal-ler.If there is an error, first try to find a solutionto the problem yourself. If you cannot find asolution to the problem yourself, contactyour IKEA store call centre. You can find afull list of IKEA appointed contacts at theend of this manual.If you operated the appliancewrongly, or the installation wasnot carried out by a registeredengineer, the visit from the AfterSales Service technician ordealer may not take place freeof charge, even during thewarranty period.InstallationGeneral informationManufacturer is not responsible for anyinjury to persons and pets or damage toproperty caused by failure to complyfollowing requirements.Caution! To proceed with theinstallation refer to the assemblyinstructions.Warning! Installation processmust follow the laws, ordinances,directives and standards(electrical safety rules andregulations, proper recycling inaccordance with the regulations,etc.) in force in the country of use!Warning! The appliance must beearthed!Warning! Risk of injury fromelectrical current.• The electrical mains terminal is live.• Make electrical mains terminal free ofvoltage.• Loose and inappropriate plug andsocket connections can make theterminal overheat.• Have the clamping connections correctlyinstalled.• Use strain relief clamp on cable.• Follow the connection diagram (it islocated on the underneath surface of thecasting of the hob).Important!• You must observe the minimum distancesto other appliances and furniturecabinets or other units according toAssembly Instruction.ENGLISH 14