IKEA GRUNDLAGGA 304.620.42 Manual

7Installation withcabinetsCheck location where the rangewill be installed for properelectric and gas supply, andstability of the floor.The dimensions shown heremust be used and are minimalunless otherwise stated. Thesemeasurements do not allowfor any clearance below thecooking top or at the rear ofthe range.Contact surface must be solidand level.Things to remember:• Do not seal the range toside cabinets.• Do not pinch the powersupply cord between therange and rear wall.• If cabinet depth is greaterthan 25”, the oven frontframe must extend beyondcabinet front by 1/2”minimum (See Fig. 1).• All openings in the wall orfloor where the range is tobe installed must be sealed.2”7”Recommendedarea for 120Voutlet on rearof wall and areafor thru the wallconnection ofpipe stub andshut-off valve.18”Min. to cabinets oneither side of range30”30”Min. height fromcooktop to cabinets25”24”*15”23”36”Std.30”11-1/2”Installation beside wallIf installing beside a wall, the minimum distance tocombustible wall on either side of range above 35¾”height should be according to the BTU of the largestburner (See Fig 2).36±1/8”(Adjustable)46-5/8”maxdooropen29-7/8”**seeabove48-1/2”max30”29-1/4”maxdoorclosedFig. 1Fig. 3Fig. 210-1/2”15”Max.Recommended area forthru the floor connectionof gas pipe stub and shut-off valve.* 9500 BTU or less 2”10,000 - 16,999 BTU 3”17,000 BTU or greater 5”** Models without self-cleanfeature may have an additional7 inches clearance from thefloor.35¾” Min.(90.8 cm)**28-3/4" with door handle26-3/8" without door handle