IKEA RENGORA Manual
Also see for RENGORA: Installation instructionsManualManualManualManual
                                    |
ENGLISH 14What to do if ...After-Sales ServiceProblems... Possible causes... Solutions...Dishwasher finishes the cycleprematurely.Display shows: 15 and On/OffLED is blinking rapidlyDrain hose positioned too lowor siphoning into home sewagesystemCheck if end of drain hose is placed at correct height (seeINSTALLATION). Check for siphoning into home sewagesystem, install air admittance valve if necessary.Air in water supply Check water supply for leaks or other issues letting air inside.The dishwasher does not fillthe water.Display shows: H6 and On/Off LED is blinkingrapidlyNo water in the water supply orthe tap is closed.Make sure there is water in the water supply or the taprunning.The inlet hose is bent. Make sure the inlet hose is not bent (see INSTALLATION)reprogram the dishwasher and reboot.The sieve in the water inlet hoseis clogged; it is necessary toclean it.After having carried out the verification and cleaning, turn offand turn on the dishwasher and restart a new program.The door doesn’t lock.Racks are not insertedcompletely.Verify that racks are inserted completely.The door lock is not engaged. Vigorously push the door until you hear the “clack” sound.Dishes have not been dried.Selected program has no dryingphase.Verify in the programs table if the selected program hasdrying phase.Rinse aid has run out or thedosage is not adequate.Add the rinse aid or adjust the dosage levels higher (seeFILLING THE RINSE AID DISPENSER).Dishes are made of non-stick orplastic.The presence of drops of water it is normal (see TIPS).Dishes and glasses showlimescale or a whitish filmSalt level is too low. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).Adjustment of the waterhardnessis not adequate.Increase the values (see WATER HARDNESS TABLE).Cap of the salt reservoir is notproperly closed.Check the salt reservoir cap.Rinse aid has run out or thedosage is insufficientAdd the rinse aid or adjust the dosage levels higher.Dishes and glasses have abluish tinge or blue streakesRinse aid dosage is excessive Adjust the dosage rates to lower values.If, after carrying out the above checks, the fault persists,disconnect the mains plug and turn off the water tap. Contactthe After-sales Service (see warranty).Before contacting our After-Sales Service, take note of thefollowing:- the description of the fault,- the appliance type and model,- the service code (the number indicated on the adhesiverating plate) inside the door on the right-hand side: |
Related manuals for IKEA RENGORA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine