IKEA RENGORA Manual
Also see for RENGORA: Installation instructionsManualManualManualManual
ENGLISH 7Product description1 Upper rack2 Foldable flaps3 Upper rack height adjuster4 Upper sprayer arm5 Lower rack6 Cutlery basket7 Lower sprayer arm8 Filter Assembly9 Salt reservoir10 Detergent and Rinse Aid dispensers11 Control pannelControl panelFirst UseAdvice regarding the first time useAfter installation, remove the stoppers from the racks and theretaining elastic elements from the upper rackFilling the salt reservoirThe use of salt prevents the formation of LIMESCALE on thedishes andon the machine’s functional components.• It is mandatory that THE SALT RESERVOIR BE NEVER EMPTY.• It is important to set the water hardness.The salt reservoir is located in the lower part of the dishwasher(see PRODUCT DESCRIPTION) and should be filled when theSALT REFILL indicator light9ENGLISH1. Press the DELAY button: the corresponding «h» symbolappears on the display; each time you press the button,the time (1h, 2h, etc. up to max. 12h) from the start ofthe selected wash cycle will be increased.2. Select the wash program, press the START/PAUSEbutton and within 4 seconds close the door: the timerwill begin counting down.3. Once this time has elapsed, the indicator light «h»switches off and the wash cycle begins.To adjust the delay time and select a shorter period of time,press the DELAY button. To cancel it, press the buttonrepeatedly until the selected delayed start indicator light«h» switches off.The DELAY function cannot be set once a wash cyclehas been started.NaturalDryDoor opening system NaturalDry is a convection drying systemwhich automatically opens the door during/after drying phase toensure exceptional drying performance every day. Door opens atthe temperature that is safe to your kitchen furniture.As additional steam protection, special designed protection foil isadded together with the dishwasher. To see how to mount protec-tion foil please refer to (INSTALLATION GUIDE).NaturalDry functionality could be disabled by the user as follows:1. Go to the Dishwasher software menu pressing and holdingbutton (6 sec).2. You switched to NaturalDry Control Menu, you could changestatus of NaturalDry functionality by pressing button:E – enabled d – disabledTo confirm the change and exit from the Control Menu pleasepress and hold button (3 sec).DELAYThe start time of the program may be delayed for a periodof time between 1 and 12 hours.ProgramDryingphaseNaturalDry Availableoptions *)Duration ofwash pro-gram(h:min)**)Waterconsumption(litres/cycle)Energyconsumption(kWh/cycle)50° 2:45 12.0 0.921 Eco2 Conventionalwash and dry 55° 2:00 15.0 1.353 Intensive 65° - 2:30 15.0 1.504 Fast 50° - - 0:55 11.5 1.105 Sanitizing 65° - 1:40 11.5 1.306 Pre-Wash - - - 0:10 4.5 0.017 Self-Clean 65° - - 0:50 8.0 0.80in the control panel is lit .1. Remove the lower rack and unscrewthe reservoir cap (anticlockwise).2. Only the first time you do this: fillthe salt reservoir with water.3. Position the funnel (see figure) andfill the salt reservoir right up to itsedge (approximately 1 kg); it is notunusual for a little water to leak out.4. Remove the funnel and wipe anysalt residue away from the opening.1 On-Off/Reset button with indicator light2 Program selection button3 Salt refill indicator ligh4 Rinse Aid refill indicator ligh5 Program number and delay time indicator6 Tablet indicator light7 Display8 Half Load indicator light9 Half Load button10 Delay button11 START/Pause button with indicator light / Tab3sech1 2 3 4 5 655° 65°50° 50° 65° 61 2 3 4 5 6 8 9 10 1173sech 7 PROGRAMS1 2 3 4 5 655° 65°50° 50° 65°765°22154361011120000 000 00000Service:78911 |
Related manuals for IKEA RENGORA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine