IKEA VALSKAPT Manual

This product requires a three-prong grounded outlet. Theinstaller must perform a ground continuity check on thepower outlet box before beginning the installation toensure that the outlet box is properly grounded. If notproperly grounded, or if the outlet box does not meetelectrical requirements noted(under ELECTRICAL REQUIREMENTS), a qualifiedelectrician should be employed to correct anydeficiencies.CAUTION: For personal safety, remove house fuse oropen circuit breaker before beginning installation to avoidsevere or fatal shock injury.CAUTION: For personal safety, the mounting surfacemust be capable of supporting the cabinet load, in addikg) product, plus additional oven loads of up to 50 poundskg).CAUTION: For personal safety, this product cannot beinstalled in cabinet arrangements such as an island ora peninsula. It must be mounted to BOTH a top cabinetAND a wall.NOTE: For easier installation and personal safety, it isrecommended that two people install this product.SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDEDTO AVOID SEVERE OR FATAL SHOCK.prong (grounding) plug which mates with a standardYou should have the wall receptacle and circuit checkedproperly grounded.tered, it is very important to have it replaced with a propDO NOT, UNDER ANY CIRCUMSTANCES, CUT, DEFORM ORELECTRICAL REQUIREMENTSkilowatts. This product must be connected to a seperateand dedicated supply circuit of the proper voltage andthe National Electrical Code or the prevailing local code forthis kilowatt rating.The power supply cord and plug should be brought to asingle grounded outlet. The outlet box should be locatedin the cabinet above the microwave oven. The outler boxand supply circuit should be installed by a qualifed electrician and conform to the National Electrical Code or theprevailing local code.Ensure properground existsbefore useIMPORTANT SAFETY INSTRUCTIONS EN3