Icom IC-F1710 Instruction Manual

Also see for IC-F1710: Operating guide Instruction manual Service manual

Icom IC-F1710 Instruction Manual Manual pdf 15 page image

112BASIC OPERATION2ï TX code number editIf the transceiver has [TX Code CH Select] or [TX Code Enter]assigned to it, TX code contents can be edited within the al-lowable digits.USING [TX CODE CH SELECT] KEY:q Push [TX Code CH Select] to enter the TX code channelselection mode.• Select the desired channel before entering the TX code channelselection mode if necessary.w Push [TX Code CH Select] for 1 sec. to enter the TX codeedit mode.e Push [TX Code CH Select] to select the desired digit tobe edited.• The digit to be edited blinks.r Push [CH Up], [CH Down] or 10-keypad*, or rotate [CHUp/Down] to set the desired digit.t Push [TX Code CH Select] to set the digit. The digit to theright will blink automatically.• When the 10-keypad* is used for setting, the digit to the right willblink automatically without pushing [TX Code CH Select].y Repeat r and t to input all allowable digits.u Push [Call] or [PTT] to transmit the edited TX code.*IC-F1810 or IC-F2810 onlyUSING [TX CODE ENTER] KEY:q Select the desired TX code channel via [TX Code CHSelect]+[CH Up] or [CH Down], [TX Code CH Up], [TXCode CH Down] or [TX Code CH Up/Down].w Push [TX Code Enter] to enter the TX code edit mode.e Push [TX Code Enter] to select the desired digit to be ed-ited.• The digit to be edited blinks.r Push [CH Up], [CH Down] or 10-keypad*, or rotate [CHUp/Down] to set the desired digit.t Push [TX Code Enter] to set the digit. The digit to the rightwill blink automatically.• When the 10-keypad* is used for setting, the digit to the right willblink automatically without pushing [TX Code CH Select].y Repeat r and t to input all allowable digits.u Push [Call] or [PTT] to transmit the edited TX code.*IC-F1810 or IC-F2810 only