Icom IC-F1710 Instruction Manual

Also see for IC-F1710: Operating guide Instruction manual Service manual

Icom IC-F1710 Instruction Manual Manual pdf 19 page image

153BIIS OPERATION3ï Group callq When a group call is received;• Beeps sound.• “ ” appears and the mute is released.• The programmed text message (e.g.“GROUP”) and the calling sta-tion ID (or text) is displayed when the indication mode is 2 lines.• The programmed text message (e.g.“GROUP”) and the callingstation ID (or text) is displayed alternately when the indicationmode is 1 line, depending on the setting.• “ ” appears or blinks depending on the setting.Appears or blinksAppearsG R O U P1 1 2 0w Push and hold [PTT], then speak into the microphone at anormal voice level.• TX indicator lights red.NOTE: Only one station is permitted to speak.e Release [PTT] to return to receive.• BUSY indicator lights green while receiving a signal.r To finish the conversation, push [P4] (Moni(Audi)) to sendthe ‘Clear down’ signal.• Either station can send a ‘Clear down’ signal.• “CLR DOWN” is displayed for 2 sec. (approx.)• “ ” disappears and the transceiver returns to the standby con-dition.ï Displaying the received call record— Queue indicationThe transceiver memorizes the calling station ID in the mem-ory. Up to 3 calls can be memorized, and the oldest call recordis erased when a 4th call is received. However, once the trans-ceiver is powered OFF, the all records are cleared.q Push [P1] (Digital) for 1 sec.• Displays following indication.When a record is available< Q U E U E >- Q U E U E ! -When no record is available< Q U E U E >N O Q U E U Ew Push [Up] or [Down], or rotate [DIAL] to select the desiredcall.e Push [P1] (Digital) for 1 sec. again to return to the standbycondition.• When no operation is performed for 30 sec., the transceiver re-turns to the standby condition automatically.