Icom IC-F4062S Sales Handbook

Also see for IC-F3062S: Servise manual Service manual Service manual Service manual Instruction manual

3-5 Scan33.Only the checked channels in the same scan list arescanned when [Scan A Start/Stop] or [Scan BStart/Stop] key is pushed.[Scan A Start/Stop] and [Scan B Start/Stop] keys areassigned in Key & Display Assign.For BIIS PMR:Never include an MSK channel into the scan list.The MSK call signal may not be received due to the callsignal time being too short to be received duringscanning.¾ Scan ModeSelect the scanning mode from Scan OFF, Mode 1(Vote), Mode 1 (Normal), Mode 2 (Prio-A), Mode 3 (Prio-A), Mode 2 (R.Sel), Mode 3 (R.Sel), Mode 2 (R.SelA),Mode 3 (R.SelA), Mode 2 (Prio-A,B) and Mode 3 (Prio-A,B).The scan stop time period, the power ON scan functionetc. are programmed in Scan Setting screen.What is Scanning?The ability of a radio user to listen to radio traffic onother channels without having to manually switch fromone channel to anotherSCAN LISTA total of 11 scanning lists ([1] to [9], [0] and [Z]) areavailable for wide variety and flexible scanningoperation.The "Z" set channel is scanned when it is being includedin the same zone with the scan start channel.Mode 1 (Normal):Normal scan. Scans all checked channels. The scanproceeds in sequence.- The last busy or paused channel (CH 02 as aboveillustration) is selected automatically when scan iscancelled.-TX via [PTT] is performed in the last busy or pausedchannel.Mode 2 (Prio-A):Priority scan. "Priority A" is selected channel in CH Atr inMemory CH screen is used for the priority channel.The checked channels are scanned in sequence whilemonitoring the priority channel.-The priority channel is selected automatically whenscan is cancelled during scanning.-TX via [PTT] is performed in the priority channel.-When scan is cancelled while receiving a signal, thechannel the signal is received on is selectedautomatically.-TX via [PTT] is performed in the channel that receivedthe signal.Mode 1 (Vote):Voting scan. Scans all checked channels to search therepeater that enables stable communication bydetecting repeater's signal strength.After the scan, the transceiver selects the repeaterchannel that the signal strength is the strongest in thesearched repeaters automatically.Mode 3 (Prio-A):