Icom IC-F4160DS Operating Manual

Also see for IC-F3162DS: Insrtuction manual Instruction manual Instruction manual Instruction manual

Contents

143dPMR OPERATION12345678910111213141516D Receiving a Group callq When a Group call is received:• Rings sound.• “ ” appears and the mute is released.• “ ” appears or blinks, depending on the pre-programmed set-tings.• The Talkgroup ID (or name) and the calling station’s ID (or name)blink.• When an All Call is received, “ALL CALL” blinks instead of “TG”and the Talkgroup ID.wWhile holding down [PTT], speak into the microphone atyour normal voice level.NOTE: Only one station is allowed to speak at thesame time.e Release [PTT] to receive.rAfter the communication is finished, push [Clear] to send a‘Disconnect’ signal to terminate the connection.• Either station can send a ‘Disconnect’ signal.• “ ” disappears, “CLR DOWN” appears for approximately 2 sec-onds, and the transceiver automatically returns to the stand-bymode.D Receiving a status messageq When a status message is received:• Rings sound.• The calling station’s ID (or name) and the status messageblink.w Push [Clear] to return to the stand-by mode.dPMR CALL TXCE CLRID 0000001TG 0100000Calling station’s IDTalkgroup IDAppears Appears or blinksdPMR CALL TXCE CLRID 0000001RX Status 00Calling station’s IDThe receivedstatus message