Icom IC-M423GE Instruction Manual

Also see for IC-M423: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

377DSC OPERATION12345678910111213141516e Select a desired intership channel using Dial or [Y]/[Z],then push [ENT].• Intership channels are already preset into the transceiver in therecommended order.About Manual Entry:Enter a desired group ID in the following way:• Select a desired number using Dial, or [Ω]/[≈].• Push [ENT] or Dial to set it.• To move the cursor, select either arrow, “←” or “→,” then push[ENT] or Dial.• The first digit is specified as ‘0,’ and the second digit is other than‘0’ for a Group ID.• The first two digits are ‘0’ for any Coast station ID.r A confirmation screen is displayed.• Confirm the call contents.t Push [CALL] to make a Group call.• If Channel 70 is busy, the transceiver stands by until the channelbecomes clear.y After the Group call has been transmitted, the followingscreen is displayed.u Announce the information using the microphone.i After the announcement, push [EXIT] to return to the nor-mal operating mode.** Only USA version, the exit confirmation dialog (p. 29) is displayed.• Only USA version, push [RESEND] to resend the call.Displayedfor only USAversion.