Icom IC-M604A Instruction Manual

Also see for IC-M604A: Instruction manual Instruction manual

Contents

176DSC OPERATION6D Deleting Individual IDq Enter “DEL:INDV ID” in the DSC Set up menu.DSC Menu ➪ Set up ➪ DEL:INDV ID(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)• When no address ID is programmed, “No ID” is displayed.Push [CLR] to exit.w Rotate [SELECTOR] to select the desired ID name to delete. e Push [ENT] to delete the selected individual ID and returnto the DSC Set up menu.r Push [CLR] or rotate [SELECTOR] to select “Exit,”then push [ENT] to return to the DSC menu.• Push [ENT] again to return to the normal operating mode.D Programming Group IDq Enter “Add:Group ID” in the DSC Set up menu.DSC Menu ➪ Set up ➪ Add:Group ID(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)w Set the group ID and ID name by pushing the keypad keys.• Edit the 8 digits of the group ID by pushing the keypad keys.• Rotate [SELECTOR] to move the cursor backward or forward.• Push [CE] to clear the ID and name.• Push [CLR] to cancel and exit the screen.The first one digit is fixed for a group ID.The first two digits are ‘0’ for any Coast station ID.e Push [ENT] to set the ID and return to the DSC Set upmenu.r Push [CLR] or rotate [SELECTOR] to select “Exit,”then push [ENT] to return to the DSC menu.• Push [ENT] again to return to the normal operating mode.D Deleting Group IDq Enter “DEL:Group ID” in the DSC Set up menu.DSC Menu ➪ Set up ➪ DEL:Group ID(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)• When no address ID is programmed, “No ID” is displayed.Push [CLR] to exit.w Rotate [SELECTOR] to select the desired ID name todelete.e Push [ENT] to delete the selected group ID and return tothe DSC Set up menu.r Push [CLR] or rotate [SELECTOR] to select “Exit,”then push [ENT] to return to the DSC menu.• Push [ENT] again to return to the normal operating mode.