Icom IC-M604A Instruction Manual

Also see for IC-M604A: Instruction manual Instruction manual

Contents

316DSC OPERATION6D Transmitting a Position Reply CallTransmit a Position Reply Call when a Position Request Callis received.q Enter “Position Reply” in the DSC menu.DSC Menu ➪ Position Reply(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)w Rotate [SELECTOR] to select the desired individualaddress or ID code, then push [ENT].When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) isconnected, next steps e and r (Current position/timeprogramming) are not displayed. Go to step t.e The position information is displayed. Edit your position data(latitude and longitude) by pushing the keypad keys. (p. 18)r After editing the position data, then push [ENT] to set. Editthe current UTC time by pushing the keypad keys, thenpush [ENT]. t Push [ENT] to transmit the Position Reply Call to theselected station.• Your position data is transmitted, when [ENT] is pushed.D Transmitting a Position Report Reply CallTransmit a Position Report Reply Call when a PositionReport Call is received.q Enter “POS Report Reply” in the DSC menu.DSC Menu ➪ POS Report Reply(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)w Rotate [SELECTOR] to select the desired individualaddress or ID code, then push [ENT].e Push [ENT] to transmit the Position Report Reply Call tothe selected station.D Transmitting a Polling Reply CallTransmit a Polling Reply Call when a Polling Request Call isreceived.q Enter “Polling Reply” in the DSC menu.DSC Menu ➪ Polling Reply(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)w Rotate [SELECTOR] to select the desired individualaddress or ID code, then push [ENT].e Push [ENT] to transmit the Polling Reply Call to theselected station.