14SCAN OPERATION (except Dutch versions)5 Scan typesScanning is an efficient way to quickly locate signals over awide frequency range. The transceiver has a priority scan set-ting and normal scan setting.In addition, the “Auto scan” function is also available for scan-ning. This function can be activated simultaneously, depend-ing on the settings on the SET mode. (p. 18)Set the TAG channels (scanned channel) before scanning.Clear those TAG channels which are not needed or inconve-niently stop scanning, such as digital communications.Choose priority or normal scan on the SET mode. (p. 18)PRIORITY SCANPriority scan searches through all TAG channels in sequencewhile monitoring Channel 16. When a signal is detected onChannel 16, scan pauses until the signal disappears; when asignal is detected on a channel other than Channel 16, scanbecomes dualwatch until the signal disappears.WX*CH 01CH 16CH 02CH 05 CH 04CH 03NORMAL SCANNormal scan, like priority scan, searches through all TAGchannels in sequence. However, unlike priority scan, Chan-nel 16 is not checked unless Channel 16 is set as a TAGchannel.CH 01 CH 02WX*CH 05 CH 04CH 03