Icom IC-M71 Instruction Manual

Also see for IC-M71: Instruction manual Instruction manual Instruction manual

Icom IC-M71 Instruction Manual Manual pdf 11 page image

53PANEL DESCRIPTIONy TRANSMIT POWER/LOCK KEY [H/L•LOCK]• Selects hgh, mddle or low power when pushed. (p. 9)• Toggles the lock functon ON/OFF when pushed andheld for 1 sec. (p. 10)u SCAN KEY [SCAN•DUAL]• Starts and stops normal or prorty scan when pushed.(pgs. 14, 15)• Enters watch mode when pushed and held for 1 sec. (p. 16)i DIAL KEY [DIAL]• Selects the regular channels when pushed. (p. 8)• Selects the U.S.A.*1, Internatonal, Canadan*2 or ATIS*3channel group when pushed and held for 1 sec. (p. 8)- The functon dsplay shows whch channel group s actve.*1 U.K. and Chna versons only.*2 Chna verson only.*3 German and Holland versons only.• Push to return to the condton before selectng the channelwhen the prorty channel or the call channel s selected.o SPEAKER-MICROPHONE CONNECTOR [SP MIC]Connects the optonal external speaker-mcrophone orheadset.NOTE: Attach the [SP MIC] cap when the optonalspeaker-mcrophone or headset s not used.!0 ANTENNA CONNECTORConnects the suppled antenna.n Function displayqw erty uio!1!4!0!2!3!5q CHANNEL NUMBER READOUT• Indcates the selected operatng channel number.• In the SET mode, ndcates the selected condton.• “DUP” appears when a duplex channel s selected.w TAG CHANNEL INDICATOR (p. 15)Appears when TAG channel s selected.e BATTERY INDICATORIndcates remanng battery power.IndicationFull Middle Chargingrequired No batteryBattery levelblinks when the battery is overcharged (or over voltage) .3