4010 DSC MENU OPERATION Verifying self-ID➥ During setup select menu indication, rotate [CH] toselect “MMSI check” then push [ENT] to dis-play the programmed MMSI ID (self-ID).➥ Push [DSC] to select DSC watch mode.➥ Push [MODE SET ] to select DSC menu.➥ Rotate [CH] to select “Set up” then push [ENT].• Push [MODE SET ] to return to DSC watch mode, orpush [FREQ/CH] to return to the select screen.* * * * * * * * S e t u p * * * * * * * *- - - - - - M M S I c h e c k - - - - - -I D : 1 2 3 4 5 6 7 8 9O KC an c e l Telephone number inputq During DSC menu indication, rotate [CH] to select“Set up” then push [ENT] to select setup menu.• The select screen is displayed.w Rotate [CH] to select the “Number,” then push[ENT].• The telephone number list screen is displayed.• 10 telephone number memories are available.e Rotate [CH] to select “<add>” then push [ENT].• The call/traffic/scan frequency setup screen is dis-played.r Push the numeral keys to input the desired 10-character telephone number name, and telephonenumber, then push [ENT].• Rotate [CH] to move the cursor.* * * * * * * * S e t u p * * * * * * * *- - - - - - - - N u m b e r - - - - - - - -N a m e : † _ _ _ _ _ _ _ _ _N u m b e r : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _O KC an c e l* * * * * * * * S e t u p * * * * * * * *- - - - - - - - N u m b e r - - - - - - - -< a d d >T e s t 11 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6T e s t 26 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1S E L O KÇC an c e l Self testingAccording to regulations, the IC-M801E has a self test-ing capability to check the internal AFSK encoder anddecoder circuits without signal transmission via thetransceiver.q During DSC watch mode, push [MODE set] to se-lect DSC menu.w Rotate [CH] to select “Self test” then push[ENT] to start the self test.e “OK” is displayed when both encoder and decoderfunctioning correctly.If the circuit has a problem, the following messageis displayed.• Both or either message is/are displayed depending onproblem.DSC-RX NG : DSC receiver’s decoder circuit has aproblem.TRANSC NG : Transceiver’s encoder or decodercircuit has a problem.* * * * * * S e l f t e s t * * * * * * *D S C - R X N GT R A N S C N GO KC an c e l* * * * * * S e l f t e s t * * * * * * *O KO KC an c e l* * * * * * S e l f t e s t * * * * * * *T e s t i n g . . .O KC an c e l

explicit definitions

quick reference

GUIDELINES

PANEL DESCRIPTION

main unit

I Handset (HS-98)

I LCD screen

I Selecting a channel

RECEIVE AND TRANSMIT

I Functions for receive

I FSK operation

CHANNEL NAME PROGRAMMING

DSC PREPARATION

I Position and time programming

CALL PROCEDURE

I Individual call

I Group call

I Geographical call

I Semi/Auto (telephone) call

WHEN RECEIVING A CALL

I Received information

I Distress call

I Distress relay call

I Geographical area call

I Memory writing

dsc menu operation

I Frequency input

I Verifying self-ID

I Memory reading/deleting

set mode

I Initial set mode

I Supplied accessories

I Basic connections

I Advanced connections

I Ground connection

I Power source

I Mounting

I Using the optional MB-108

I Using the optional MB-75

I Transceiver dimensions

I Fuse replacement

I Connector information

frequency programming

I Programming a frequency

SPECIFICATIONS

OPTIONS

I Speaker (SP-24E)

ABOUT CE

Icom IC-M801E Instruction Manual

IC-M801E