4311SET MODE11 Initial set modeInitial set mode operation is used for programming in-frequently changed values, conditions or functions.DD Entering set modeq Turn the power OFF, if the transceiver is poweredON.w While pushing [MODE SET], push [POWER] to turnthe power ON to enter initial set mode.e Rotate [GRP] to select the desired item.r Rotate [CH] to set the values or conditions for theselected item.t Turn the power OFF and ON again to exit set mode.DD Initial set mode itemsNOTE: Selection of some of the set mode items de-scribed here are not available on some transceiverversions.[POWER][MODE SET ]Number of user channelsThis item sets the number of user channels. Up to160 channels can be set. (default: 160)* * * S E T M O D E * * *I T E M S E LFSK ITU channel selectionThis item sets the capability of the ITU channels forFSK from ON and OFF.This item will not appear when ITU channels are in-hibited. (default: ON)* * * S E T M O D E * * *I T E M S E LO F FO NÇÇAutomatic tuneWhen an optional automatic antenna tuner is con-nected, tuning can be started automatically withoutpushing [TUNE THRU], for instant operation.If manual tuning is required, this automatic operationcan be deactivated.(default: OFF)* * * S E T M O D E * * *O F FO NÇÇI T E M S E LScan typeThis item selects one of the following scan functions.Programmed scan searches signals within the fre-quency range and activates slowly while squelch isopen and fast while squelch is closed.Channel scan and channel resume scan searches 20channels around a user selected channel, orsearches all ITU channels in the band when an ITUchannel is selected. (default: CH SCAN)* * * S E T M O D E * * *C H S C A NC H - R E S U M E S C A NP R O G R A M S C A NÇÇI T E M S E L

explicit definitions

quick reference

GUIDELINES

PANEL DESCRIPTION

main unit

I Handset (HS-98)

I LCD screen

I Selecting a channel

RECEIVE AND TRANSMIT

I Functions for receive

I FSK operation

CHANNEL NAME PROGRAMMING

DSC PREPARATION

I Position and time programming

CALL PROCEDURE

I Individual call

I Group call

I Geographical call

I Semi/Auto (telephone) call

WHEN RECEIVING A CALL

I Received information

I Distress call

I Distress relay call

I Geographical area call

I Memory writing

dsc menu operation

I Frequency input

I Verifying self-ID

I Memory reading/deleting

set mode

I Initial set mode

I Supplied accessories

I Basic connections

I Advanced connections

I Ground connection

I Power source

I Mounting

I Using the optional MB-108

I Using the optional MB-75

I Transceiver dimensions

I Fuse replacement

I Connector information

frequency programming

I Programming a frequency

SPECIFICATIONS

OPTIONS

I Speaker (SP-24E)

ABOUT CE

Icom IC-M801E Instruction Manual

IC-M801E