5512CONNECTION AND INSTALLATION12 Using the optional MB-108The optional MB-108 mounting bracket is available formounting the transceiver’s main unit. The MB-108 al-lows you to one-touch attachment/detachment capa-bilities.CAUTION! WEAR GLOBES when in-stalling the MB-108.Edges of the MB-108 may be sharp and may easilycut your fingers, hands, etc.q Attach the mounting handles with the supplied hexhead bolts (M6×15) , spring and flat washers asbelow.w Drill 7 holes of 6–8 mm ( 1⁄4–5⁄16 in) in diameter,using the template supplied with the MB-108.e Attach the mounting base onto a flat surface usingwith the hex head bolts (M6×50) , spring and flatwashers, and nuts, supplied with the MB-108, asbelow.r Mount the transceiver main unit (mounting handleshas attached) onto the mounting base.t Fix the main unit by locking 4 latches on themounting handles.zxHex head bolt (M6×50)Spring washerSpring washerFlat washerFlat washerMountingbaseNut (M6)Hex head bolt (M6×15)Spring washerFlat washerMountinghandle

explicit definitions

quick reference

GUIDELINES

PANEL DESCRIPTION

main unit

I Handset (HS-98)

I LCD screen

I Selecting a channel

RECEIVE AND TRANSMIT

I Functions for receive

I FSK operation

CHANNEL NAME PROGRAMMING

DSC PREPARATION

I Position and time programming

CALL PROCEDURE

I Individual call

I Group call

I Geographical call

I Semi/Auto (telephone) call

WHEN RECEIVING A CALL

I Received information

I Distress call

I Distress relay call

I Geographical area call

I Memory writing

dsc menu operation

I Frequency input

I Verifying self-ID

I Memory reading/deleting

set mode

I Initial set mode

I Supplied accessories

I Basic connections

I Advanced connections

I Ground connection

I Power source

I Mounting

I Using the optional MB-108

I Using the optional MB-75

I Transceiver dimensions

I Fuse replacement

I Connector information

frequency programming

I Programming a frequency

SPECIFICATIONS

OPTIONS

I Speaker (SP-24E)

ABOUT CE

Icom IC-M801E Instruction Manual

IC-M801E