Icom IC-RX7 Instruction Manual

Also see for IC-RX7: Price list Instruction manual Instruction manual Service manual Service manual addendum

Icom IC-RX7 Instruction Manual Manual pdf 38 page image

306 SEARCH AND SCAN OPERATIONSNew2001■ Search edges programmingSearch edges programming can be stored frequency edges,receiving mode, tuning steps, attenuator ON/OFF andsearch name. But other items of the frequencies are not nec-essary to program. In this case, settings of each frequencyband are used to the search.q Enter “PROGRAM SEARCH” in SEARCH menu.MENU ➪ SEARCH ➪ PROGRAM SEARCH(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)• Search menu can also be entered by pushing and holding[SEARCH] for 1 sec.• Program number selection screen appears.w Push [r] or [s] several times to select the desired pro-gram number, then push [ENT MW] to enter the program.MWMENUENTHOLD VSCAN.1472580369SKIPNO.CLRSQLDIALSEARCHATTMWENTMENUPush MWENTe Push [s] once to select “EDIT,” then push [ENT MW] (or[w]).r Set the desired edge frequencies either “LOW” or “HIGH.”• Other items cannot be programmed until these frequencies areinput.LOW:/HIGH:q Push [ENT MW] (or [w]) to enter the frequency input.w Edit the desired frequency with keypad (pgs. 20, 21).e Push [r] or [s] to select another edge, then edit dif-ferent frequency.