Icom IC-RX7 Instruction Manual

Also see for IC-RX7: Price list Instruction manual Instruction manual Service manual Service manual addendum

Icom IC-RX7 Instruction Manual Manual pdf 48 page image

406 SEARCH AND SCAN OPERATIONSNew2001■ All scanAll scan repeatedly scans all memory channels programmedwith any frequencies in the memory channel selected forscanning.q Enter “ALL” in SCAN menu.MENU ➪ SCAN ➪ ALL(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)• SCAN menu can also be entered by pushing and holding[SCAN] for 1 sec.• Scan pauses when a signal is received.• Rotate [DIAL] to change the scanning direction.w Push [HOLD V] to stop the scan temporarily, if desired.• Push and hold [v] or [w] for 1 sec. several times to select thedesired category; or push [v] or [w] several times to select thedesired group.• Push [HOLD V] again to restart the scan.MWMENUENTHOLDSCAN.1472580369SKIPNO.CLRSQLDIALSEARCHATTMWENTHOLD VMENUPush MWENT■ Category scanCategory scan repeatedly scans all memory channels in thesame category as the selected memory channel has beenprogrammed.q Enter “CATEGORY” in SCAN menu.MENU ➪ SCAN ➪ CATEGORY(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)• SCAN menu can also be entered by pushing and holding[SCAN] for 1 sec.w Push [r]/[s] (or rotate [DIAL]) to select the desired cat-egory, then push [ENT MW].• Scan pauses when a signal is received.• Rotate [DIAL] to change the scanning direction.e Push [HOLD V] to stop the scan temporarily, if desired.• Push and hold [v] or [w] for 1 sec. several times to select thedesired memory category; or push [v] or [w] several times toselect the desired group.• Push [HOLD V] again to restart the scan.