Icom IC-RX7 Instruction Manual

Also see for IC-RX7: Price list Instruction manual Instruction manual Service manual Service manual addendum

Icom IC-RX7 Instruction Manual Manual pdf 54 page image

466 SEARCH AND SCAN OPERATIONSNew200146■ Other SCAN menu itemsD Stop beep (STOP BEEP)Selects the stop beep setting for scan.• OFF : The stop beep is turned OFF. (default)• ON : The receiver emits a long beep when a scanpauses with signal is received.D Scan pause timer (PAUSE)Selects the scan pause time. When receiving signals, thescan pauses according to the scan pause time.• 2–20 SEC : Scan pauses for 2–20 sec. on a receivedsignal in 2 sec. steps. (default: 10 sec.)• HOLD : Scan pauses on a received signal until itdisappears. Rotate [DIAL] to resume man-ually.D Scan resume timer (RESUME)Selects the scan resume time from a pause after the re-ceived signal disappears.• 0 SEC : Scan resumes when a received signal disap-pears.• 1–5 SEC : Scan pauses 1–5 sec. after a received signaldisappears. (default: 2 sec.)• HOLD : Scan remains paused on the received sig-nal even if it disappears. Rotate [DIAL] toresume manually.Scan resume timer must be set shorter than scan pausetimer (previous item), otherwise this timer does not activate.