Icom IC-T90A Instruction Manual

Also see for IC-T90A: Service manual Instruction manual

Contents

324BASIC OPERATIONplit operationequency operation allows you to transmit and receivedifferent frequencies in the same band. The split fre-y operation is performed using 2 frequencies, one inand one in B.ting split frequency operationh [8 SET] for 1 sec. to enter set mode.ate [DIAL] until “EXP2” appears.h [8 SET] to select expanded set mode 2.ate [DIAL] to turn the expanded set mode 2 ON.h [8 SET] to exit expanded set mode 2.ate [DIAL] until “SPLIT” appears.h [8 SET] to select split function.ate [DIAL] to select split function ON or OFF.h [VFO] to exit set mode.• “SPA” or “SPB” appears andthe split frequency operation isactivated.D Split frequency operation example[EXAMPLE]: VFO A FM 145.240 MHzVFO B FM 145.340 MHzq Push [VFO] several times to select VFO A.• Pushing [VFO] toggles VFO A and B.w Push [BAND] several times to select the 144 MHz band.e Push [MODE] several times to select FM mode.r Set the operating frequency to 145.240 MHz with the tun-ing dial.t Push [VFO] to select VFO B.y Push [BAND] several times to select the 144 MHz band.u Push [MODE] several times to select FM mode.i Set the operating frequency to 145.340 MHz.o Push [PTT] to start the split frequency operation.FMSKIPPSKIPPFM[DIAL][PTT][BAND][MODE][VFO][8 SET]VFO AVFO BFMSKIPPrrBASIC OPERATION