Icom IC-T90A Instruction Manual

Also see for IC-T90A: Service manual Instruction manual

Contents

486SCAN OPERATIONyySCAN OPERATIONemory scanry scan repeatedly scans all memory channels exceptannels.are 3 types of memory scan, select band scan, fullcan and bank scan are available.l memory scan/Select band scanh [MR] to enter memory mode.ile pushing and holding [MODE SCAN], rotate [DIAL] toct from scan-guidance, [ALL], [SEL BC], [SEL 5], [SEL[SEL WFM], [SEL AIR], [SEL 144], [ SEL 220], [SEL], [SEL 440] or [SEL 800].LL] scans full programmed memories except skip channels.an-guidance appear(s) for programmed band(s) only.an repeatedly scans memory channels except skip channelsthin a selected memory band.ease [MODE SCAN] to start the memory scan.cimal point blinks while scanning.change the scanning direction, rotate [DIAL].ile receiving an unwanted signal and scan pauses, push [5IP] for 1 sec. to set the received channel as a skip channel.h [VFO] to stop the scan.l bank scan/Bank scancan repeatedly scans memory channels except skipels within a selected memory bank.q Push [MR] to enter the memory bank mode.• Pushing [MR] toggles the memory channel and memory bankmodes.• Program 2 or more memory channels to a memory bank in ad-vance.w Push [BAND] several times to select the desired memorybank if desired.e While pushing [MODE SCAN], rotate [DIAL] to select [ALL]or [BANK].• “ALL” scans for full bank or “BANK” scans for within a specifiedmemory bank only.r Release [MODE SCAN] to start the memory scan.• Decimal point blinks while scanning.• To change the scanning direction, rotate [DIAL].t Push [VFO] to stop the scan.FMSKIPPRelease [MODE SCAN]Full bank scanSelect band scanFMSKIPP*Flashes while scanning.FMSKIPPBank scan*** ****Bank name appears.