Icom IC-T90A Instruction Manual

Also see for IC-T90A: Service manual Instruction manual

Contents

MEMORY/CALL CHANNELSCopying memory contentsis is convenient when programming memory contents intocan edge channel or call channel.• Call or scan edge channel contents can be copied in the samemanner.Push [MR S.MW] to select memory mode.Select the memory channel to be copied with [DIAL].Push [MR S.MW] for 1 sec.• Memory channel indicator and number blinks.• Do not hold [MR S.MW] for more than 2 sec., otherwise the pre-viously selected VFO will be overwritten.Rotate [DIAL] to select the target memory channel.Push [MR S.MW] for 2 sec. to copy. Memory namesEach memory, scan edge and call channels can be pro-grammed with an alphanumeric name such as a repeatername, club name, etc., for easy recognition. Names can bea maximum of 6 characters—see the table at right for avail-able characters.D Memory name inputq Push [MR] to select memory mode.w Set the desired memory channel with [DIAL].e Push [MR S.MW] for 1 sec. to indicate the memory channel.• Memory channel indicator blinks.• Do not hold [MR S.MW] for more than 2 sec., otherwise the pre-viously selected VFO will be overwritten.r Push [CALL/TV] several times to select “NAME.”• Memory name screen appears. The 1st character of the nameand “X” blinks.• Previously programmed name appears, if programmed.FM DUP TFM DUP TFM DUP T[DIAL][MR]Select a channel to copy.Select desired channel.Write into the channel.