Icom IF1721/D Instruction Manual

Icom IF1721/D Instruction Manual Manual pdf 17 page image

122BASIC OPERATION12345678910111213141516D TX code number edit(PMR or BIIS PMR operation only)If the transceiver has [TX Code CH Select] or [TX Code En-ter] assigned to it, TX code contents can be edited within theallowable digits.USING [TX CODE CH SELECT] KEY:Push [TX Code CH Select] to enter the TX code channelqselection mode.• Select the desired channel before entering the TX code channelselection mode if necessary.Push [TX Code CH Select] for 1 sec. to enter the TX codewedit mode.Push [TX Code CH Select] to select the desired digit toebe edited.• The digit to be edited blinks.Push [CH Up], [CH Down] or 10-keypad*, or rotate [CH Up/rDown] to set the desired digit.Push [TX Code CH Select] to set the digit. The digit to thetright will blink automatically.• When the 10-keypad* is used for setting, the digit to the right willblink automatically without pushing [TX Code CH Select].Repeaty r and t to input all allowable digits.Push [Call] or [PTT] to transmit the edited TX code.u*IC-F1821/D or IC-F2821/D onlyUSING [TX CODE ENTER] KEY:Select the desired TX code channel via [TX Code CHqSelect]+[CH Up] or [CH Down], [TX Code CH Up], [TXCode CH Down] or [TX Code CH Up/Down].Push [TX Code Enter] to enter the TX code edit mode.wPush [TX Code Enter] to select the desired digit to be ed-eited.• The digit to be edited blinks.Push [CH Up], [CH Down] or 10-keypad*, or rotate [CH Up/rDown] to set the desired digit .Push [TX Code Enter] to set the digit. The digit to the righttwill blink automatically.• When the 10-keypad* is used for setting, the digit to the right willblink automatically without pushing [TX Code CH Select].Repeaty r and t to input all allowable digits.Push [Call] or [PTT] to transmit the edited TX code.u*IC-F1821/D or IC-F2821/D only