Icom IF1721/D Instruction Manual

Icom IF1721/D Instruction Manual Manual pdf 27 page image

223BIIS OPERATION12345678910111213141516GeneralDThe short data message, SDM, can be sent to an individualstation or group stations. Also, 8 SDM memory channels areavailable and the messages can be edited via PC program-ming.Transmitting an SDMD While in the standby condition, push [P1] (Digital), thenqpush [Up] or [Down] or rotate [DIAL] to select the desiredstation/group code.Push [P1] (Digital) again, then push [Up] or [Down] or ro-wtate [DIAL] to select the desired SDM.Or, you can select the desired SDM using [Status Up]/[Status Down] key directly.M E S S A G E 1S D M 1SDM is displayed.AppearsPush [P0] (Call) or [PTT]* to transmit the SDM to the se-elected station/group.*PTT call can be made only when PTT call capability is permitted.• 2 beeps will sound and the transceiver returns to the standbycondition automatically when the transmission is successful.Transmitting an SDM■ (Short Data Message)