Icom MA-500TR Instruction Manual

Also see for MA-500TR: Instruction manual

Icom MA-500TR Instruction Manual Manual pdf 13 page image

52PANEL DESCRIPTION12345678910111213141516t TARGET BOXShows the selected AIS target (or waypoint, if it is set; seepages 26–28 for setting detail).• When a target box appears, push [ENT] to display the detailscreen of the selected AIS target or waypoint.y YOUR VESSEL ICONYour vessel icon is displayed in the center of the display.• When “N-UP” is displayed, the vessel icon automatically pointsin the direction you are heading, in 45 degrees steps.• When “AC-UP” is displayed, the vessel icon constantly points tothe top of the plotter display.• When your vessel moves less than 2 knots, the icon is displayedas “ .”u KEY ENTRY GUIDEShows the key entry guide.➥ Push [Ω] or [≈] to select each AIS target icon (or way-point), in sequence. (p. 15)• A target box will appear around the selected target icon.➥ Push [ENT] to display the detail screen of the selectedAIS target or waypoint. (pp. 15–17)i DISPLAY RANGEShows the selected display range.• 0.125, 0.25, 0.5, 0.75, 1.5, 3, 6, 12, 24 nm (nautical miles) areselectable.• Description of the iconsIcon DescriptionAIS target: VesselThe tip of the target triangle automatically pointsin the direction it’s heading.The icon blinks when the AIS target is closer thanyour CPA and TCPA settings. (Dangerous target)AIS target: Lost target*The target triangle is marked with a diagonal line.AIS target: Base StationAIS target: Search and Rescue (SAR)AIS target: Aids to Navigation (AtoN)WaypointAIS target: AIS-SART, MOB and EPIRB-AIS* A vessel is regarded as a “Lost target” after a specified pe-riod of time has passed since the vessel last transmitteddata. (p. 29)The “Lost target” icon disappears from the plotter display 6minutes and 40 seconds after the vessel was regarded as a“Lost target.” Ask your dealer for details.