Icom MA-500TR Instruction Manual

Also see for MA-500TR: Instruction manual

Icom MA-500TR Instruction Manual Manual pdf 17 page image

93PREPARATION12345678910111213141516■ Initial setting modeThe Initial setting mode allows you to set the vessel’s infor-mation that is exchanged among the vessels and/or basestations. And, you can set the seldom-changed NMEA Input/Output settings.NOTE: After the MMSI code programming, the transpon-der automatically enters the Initial setting mode. In thiscase, skip steps q and w.q Push [MENU] to enter the Menu mode.w Push [∫] or [√] to select “Initial Setting,” then push [ENT].e Push [∫] or [√] to select the desired item, then push [ENT].r Enter the characters or select the desired option.The procedures are described on pages 10 to 13.t Repeat steps e and r to set other items.y Push [CLEAR] to exit the Initial setting mode, and returnto the Menu mode.u Push [CLEAR] to exit the Menu mode.[CLEAR][ENT][MENU][∫][√]D MMSI codeEnter the vessel’s MMSI code.See page 7 for setting details.• If the MMSI code has already been set, you cannot change this.D NameEnter the vessel’s name of up to 20 characters.See page 13 for setting details.D Call SignEnter the Call Sign of up to 7 characters.The Call Sign is a unique designation ID for a station.See page 13 for setting details.