82 BASIC OPERATION Direct frequency settingmode operationThe direct frequency setting mode operation is useful whensetting the desired frequency directly to the active frequencyindicator.q Push and hold [↔] for 2 sec. to enter the direct frequencysetting mode.• The only active frequency is displayed.w Select an operating frequency.• Refer to pgs. 5–6 in details.e Push [RCL] or [↔] to exit the direct frequency settingmode. Dualwatch operationThe dualwatch operation monitors the active frequency in in-tervals even when receiving a signal on the standby fre-quency. When a signal is received on the active frequency,the radio switches to the active frequency and stays on thefrequency until the signal disappears irrespective of thestandby frequency condition.q Push [DUAL] to enter dualwatch operation.• “DUAL” appears on the active frequency indicator.• The active or standby frequency‘s “RX”blinks when receiving sig-nal or opening the squelch.w Push [DUAL] again to exit dualwatch operation.• “DUAL” disappears.• You may also exit dualwatch by pushing [PTT].121.80RX129.405121.00RX DUAL RXATTENTION!During dualwatch operation, the standby frequency’s AFmay be interrupted at constant intervals, but this is not amalfunction.

explicit definitions

Front panel

I Rear panel

i function display

Frequency selection

Receiving

Frequency set example

Dualwatch operation

Programming notes

Channel selection

programming example

Transferring memory contents

Group memory channel

clearing the memory contents

Programming group names (Group memory channel only)

I Channel tag list

GPS memory

Lock function

Squelch test function

MENU mode programming

I MENU mode items

group memory channel display

transmitting microphone selection

menu mode

installation and removal

CLONING

SPECIFICATIONS

OPTIONS

ABOUT DOC

INDEX

Icom iC-A210E Instruction Manual

installation procedures

IC-A210E

cable connections

PANEL DESCRIPTION

n Rear panel

n Function display

BASIC OPERATION

n Frequency exchanging (Step 2-2)

n Frequency setting example

n Direct frequency setting mode operation

MEMORY OPERATION

n Channel selection

n Programming example

n Transferring memory contents

n Regular memory channel

n History memory channel

n Programming channel names (Regular memory channel only)

n Programming channel tag (Group memory channel only)

n GPS memory

OTHER FUNCTIONS

n Intercom function

MENU MODE

n MENU mode items

n function display

n frequency setting example

n dualwatch operation

n channel selection

n programming example

memory mode menu

n history memory channel

programming channel names

n channel tag list

MENU mode.

n menu mode items

n MENU mode tems