163 MEMORY OPERATION Programming channel tag(Group memory channel only)The tag name can be set a 3-character name in addition tothe group number. It is convenient for separating memorytype.q Push [RCL], then rotate [O-DIAL] to select the desiredgroup memory channel in the memory mode.• Rotate [O-DIAL] to select the memory channel type if necessary.w Push [MEM], then rotate [O-DIAL] to select “CH TAG”when selecting “LABEL” in “Group memory channel dis-play” of the menu mode (p. 22)e Push [MEM], then rotate [DIAL] to select the desiredchannel tag.• The tag type as shown below is selectable.r Push [MEM] to decide the channel tag.• Selectable tags___ / TWR / GND / ATS / ATF / APP / ARR / AWS / CLR /CTF / DEP / FSS / RFS / UNI / MF / OTH / U-1 / U-2 Channel tag listTAG DISPLAY MEANSNAME Group* 1 GPS* 2_ _ _ YES – Non-tagTWR YES YES TowerGND YES YES GroundATS YES YES ATISATF YES YES Air trafficAPP YES YES ApproachARR YES YES ArrivalAWS YES YES Automatic Weather StationCLR YES YES Clearance / DeliveryCTF YES YES Common Traffic Advisory FrequencyDEP YES YES Departure FrequencyFSS YES YES Flight Service StationRFS YES YES Remote Flight Service StationUNI YES YES Unicom frequencyMF YES YES Mandatory frequencyOTH YES – OtherU-1 YES – User1 setting (Refer to p. 24)U-2 YES – User2 setting (Refer to p. 24)*1Group memory, * 2GPS memoryCH01127.005122.00RX GRP01TWR