Icom iC-F3033S Instruction Manual
Also see for iC-F3031S: Instruction manualService manual addendumInstruction manual
                                |
52 PANEL DESCRIPTIONProgrammable function keysNThe following functions can be assigned to [Emer], [Side1],[Side2], [Side3], [P0], [P1], [P2] and [P3] programmablefunction keys.Consult your Icom dealer or system operator for details con-cerning your transceivers programming.If the programmable function names are bracketed in the fol-lowing explanations, the specific key is used to activate thefunction depends on the programming.CH UP AND DOWN KEYS± Push to select an operating channel.± Push to select a transmit code channel after pushing [TXCode CH Select].± Push to select a DTMF channel after pushing [DTMF Au-todial].± Push to select a scan group after pushing and holding[Scan A Start/Stop]/[Scan B Start/Stop] for 1 second.SIREN KEYPush to emit a siren.ZONE KEYPush this key, then push [CH Up] or [CH Down] to select thedesired zone.What is “zone”?— The desired channels are assignedinto a zone according to the intended use for grouping.For example, ‘Staff A’ and ‘Staff B’ are assigned into a“Business” zone, and ‘John’ and ‘Cindy’ are assigned intoa “Private” zone.SCAN A KEY± This key’s operation depends on the Power ON Scan set-ting.When the power ON scan function is turned OFF;Push to start and cancel scanning operation. In case oftransmission during scan, scanning will be cancelled.When the power ON scan function is turned ON;Push to pause scanning, then resumes scanning afterpassing a specified time period. In case of transmissionduring scan, scanning will be cancelled.± Push and hold this key for 1 second to indicate the scangroup, then push [CH Up] or [CH Down] to select the de-sired group.SCAN B KEY± Push to start and cancel scanning operation. In case oftransmission during scan, scanning will be paused. Thenresumes scanning after passing a specified time period.± Push and hold this key for 1 second to indicate the scangroup, then push [CH Up] or [CH Down] to select the de-sired group.PRIO A/B KEYS± Push to select Priority A or Priority B channel.± Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1second to reassign the operating channel to Priority A orPriority B channel. |
manualsdatabase
Your AI-powered manual search engine