10 SCANS10-5D Select Memory scan operation1. Start the Memory scan.L See steps 1 ~ 3 in “Memory scan operation” (p.10-4)for details.2. While scanning, touch [SEL No.] to select theSelect scan number.L Each time you touch [SEL No.], “★1,” “★2,” “★3,” and“★1,2,3” are alternately displayed.★1: Channels specified as ★1 are scanned.★2: Channels specified as ★2 are scanned.★3: Channels specified as ★3 are scanned.★1,2,3:Channels specified as ★1, ★2, or ★3 arescanned.3. While scanning, touch [SELECT] to switch to theSelect Memory scan.BlinksBlinksWhile Memory scanningWhile Select Memory scanningL While Select Memory scanning, “SELECT MEMORYSCAN” blinks instead of “MEMORY SCAN.”LEach time you touch [SELECT], the Memory scanand the Select Memory scan are switched.4. Touch [MEMO] to cancel the scan.5. To close the SCAN screen, push EXIT .Memory scan and Select Memory scan (Memory mode) (Continued)D Setting Select Memory channel1. Open the SCAN screen.L See steps 1 ~ 2 in “Memory scan operation” (p.10-4)for details.2. Push ▲ or ▼ to select the desired Memorychannel to be set as the Select Memory channel.3. Touch [SELECT] to set the Select scan number.L Each time you touch [SELECT], “★1,” “★2,” “★3,” and“(no icon)” are alternately displayed.4. To close the SCAN screen, push EXIT .DisplayedD Canceling all Select Memory channelsettings1. Open the SCAN screen.L See steps 1 ~ 2 in “Memory scan operation” (p.10-4)for details.2. Touch [SELECT] for 1 second.• Opens the SELECT ALL CLEAR screen.3. Touch the desired option to clear all Selectmemory channel settings.4. Touch [YES] to cancel the Select setting.5. To close the SCAN screen, push EXIT .