Icom ic-7300 Full Manual

Also see for IC-7300: Reference manual Basic Manual Service manual Basic Manual QUICK START OPERATING GUIDE

Contents

Icom ic-7300 Full Manual Manual pdf 27 page image

3 BASIC OPERATION3-5Setting the frequency (Continued)D About the 1/4 Tuning functionMode: SSB-D/CW/RTTYWith the Tuning Function OFF, turn ON the 1⁄4 Tuningfunction to reduce the tuning speed to 1⁄4 of thenormal speed, for finer tuning.1. Push FUNCTION .• Opens the FUNCTION screen.2. Touch [1/4].1/4 Tuningfunction3. Push EXIT .D Directly entering a frequencyYou can set the frequency without rotating MAIN DIALby directly entering it on the keypad.Entering the operating frequency1. Touch the MHz digits.(Example: 14)• Opens the F-INP screen.3. Start entry with the MHz digits.LTo clear the entry, touch [CE].L To clear the entry and return to the previous screen,push EXIT .• Opens the BAND STACKING REGISTER screen.2. Touch [F-INP].BAND STACKING REGISTER screenF-INP screen (Example:14.025)4. Touch [ENT] to set the entered frequency.• Closes the F-INP screen.LIf you touch [ENT] when the digits under 100 kHz arenot entered, “0” will be automatically entered into thedigits that are blank.Entry examples• 14.025 MHz: [1], [4], [•(−)], [0], [2], [5], [ENT]• 18.0725 MHz: [1], [8], [•(−)], [0], [7], [2], [5], [ENT]• 730 kHz: [0], [•(−)], [7], [3], [ENT]• 5.100 MHz: [5], [•(−)], [1], [ENT]• 7.000 MHz: [7], [ENT]• Changing from 21.280 MHz to 21.245 MHz:[•(−)], [2], [4], [5], [ENT]FUNCTION screenD About the Auto Tuning Step functionThe tuning step automatically changes, depending onthe rotation speed of MAIN DIAL .L You can change the Auto Tuning Step function settings inthe following menu. (p. 12-6)MENU » SET > Function > MAIN DIAL Auto TS