Ideal Boilers LOGIC MAX HEAT H 18 Installation & Servicing

Also see for LOGIC MAX HEAT H 12: User guide

30Installation and ServicingFLUE OUTLETSECTION 2 - INSTALLATIONNote.A flat or pitched roof flashing plate (not supplied) is required before proceedingwith the installation of this kit.This kit is suitable for both flat and pitchedroof terminations, using a concentric flue torun vertically from the top of the boiler andterminating above roof level.Connection to the top of the boiler is madeusing a separately supplied vertical connector.WEATHER PROOFINGWhere the flue passes through the roof line anadequate seal must be made. This is achievedby using either:- Flat roof weather collaror- Universal weather collar.ACCESSORIESFlue Duct Extension Kits are available forflue lengths extending beyond 1m. Thesepacks contain 500mm, 1000mm and 2000mmextension ducts and may be cut to the desiredlength.If the offset vertical option is used an elbow Kitis required.For a full accessories list refer to www.idealboilers.com.2.16 FITTING THE OPTIONAL ROOF FLUE KIT (Flat or Pitched)