Ikegami HDK-55 Operation Manual

Also see for HDK-55: Brochure & specs

Contents

Ikegami HDK-55 Operation Manual Manual pdf 74 page image

58 HDK-55 1206 VER1 (U)4.2 Switch Position Check4.2 Switch Position CheckWhen the camera is used for the first time, set the switches on the camera to the positions indicated in the figure below, and ensurethat the camera works properly. After ensuring that it works properly, set the switches according to the environment in which thecamera is used and shooting conditions.GAIN SELECT switchAWB SELECT switchCC FILTER switch (ECC)ND FILTER switchOUTPUT SELECT switchSHUTT/SUP-V switchCamera Right- GAIN SELECT switch : 0- AWB SELECT switch : A- CC FILTER switch (ECC) : A (3200K)- ND FILTER switch : 1 (100%)- OUTPUT SELECT switch : CAM- SHUTT/SUP-V switch : OFFNote:When the camera is connected to the BS, the switches on thecamera are disabled except the CC FILTER switch (ECC) andND FILTER switch. When the camera has the operationalpriority for the CC FILTER (ECC) and ND FILTER switches,the FILTER local indicator lights. Pressing the FILTER HEADswitch will switch the operational priority between the cameraand the BS.P.FUNC switchCamera Front- P.FUNC switch : OFFNote:When the camera is connected to the BS, you cannot use theP.FUNC switch.INCOM FRONT VRSELECT switchPROD MICswitchENG MICswitchMIC-1 POWERswitchMIC-2 POWERswitchCamera Rear- INCOM FRONT VR SELECT switch : OFF- ENG MIC switch : ON- PROD MIC switch : ON- MIC-1 POWER switch, MIC-2 POWER switchDepending on the type of microphone to use, the power supplysettings differ.Switch Position DescriptionAB+12V Supplies +12V AB power to the microphone.OFF Supplies no power to the microphone.Applicable for a dynamic microphone ora microphone with built-in power supplywhich requires no power supply.+48V Supplies +48V Phantom powerReference:For details on the microphone, refer to the instructions accompanying the microphone to be used.