InstallationItem no. 10302204, Revision 00 25 ( 40 )8.3.2 Setting the sealing airFor guidelines on air quality,see "Air purity classes (ISO8573-1) [} 24]" section.The adjustment value for the sealing air depends on the hose diameter andlength.Ü Hose diameter: DN 4Ü The setting value can be found in the following diagram.Ü To ensure effective control, turn on the sealing air and cooling when turn-ing on the machine. This protects the HF spindle even when it is stationary.Lowest sealing air supply Dry machiningMedium sealing air supply Machining with spray waterHighest sealing air supply Machining with hose water8.3.3 Setting valuesFor guidelines on air quality,see "Air purity classes (ISO8573-1) [} 24]" section.Ü Keep to the following values:Pneumatic system for tool change ≥ 6,0 bar

Jäger Z45-D260.06 S3A Manual