Jäger Z45-D260.06 S3A Manual

DismantlingItem no. 10302204, Revision 0034 ( 40 )13 DismantlingProceed as follows to remove the HF spindle:Ü Completely disconnect the power supply.Ü Completely disconnect the media supply (air and liquid).Ü Make sure that the shaft of the HF spindle has come to an absolute stand-still.Ü Remove all connections from the HF spindle.Ü Remove the HF spindle from the machine.13.1 Disposal and environmental protectionMore than 90% of the materials used in the HF spindle can be recycled (alu-minum, stainless steel, steel, copper, etc.)The HF spindle may not be disposed of with normal domestic waste.Ü Remove all non-recyclable materials.Ü Dispose of the HF spindle as scrap at an approved recycling facility.Ü Follow all rules of the responsible administrative bodies.If the HF spindle cannot be dismantled, send the HF spindle to Alfred JägerGmbH. Alfred Jäger GmbH shall not assume the costs incurred for shipmentand the fees for the recycling facilities.