BM-141GE / BB-141GE321. Type in the frame rate of theconnected camera.BM-141GE and BB-141GE operate at 30 fps.2. Set the bandwidth at 80%.3. Click the calculation tab.4. New value is calculated.5. Click OK. This shown value isautomatically transferred to the PacketDelay column of the Control Tool.8.2.8 Confirm the Filter Driver is used♦ The filter driver is installed as an optional function when JAI SDK is installed. If thefilter driver is not installed at that time, it can be installed , All Programs ⇒ JAI SDK⇒ GigE Vision Filter Driver ⇒ Install GigE Vision Filter Driver.♦ If the Filter Driver is installed properly, the Camera Control Tool indicates “DriverType Filter Driver“ in the Network Interface.
