BM-141GE / BB-141GE598.6.9 Multi ROI mode (Multi Region of Interest)In the trigger mode, the maximum 5 ROIs located on theone image can be output by one trigger input. By usingthis mode, the data stream can be smaller.Each ROI can be overlapped.8.7. Operation Mode and Functions matrixIDValue(Note 1)ModeShutterPreset /Program.VerticalBinning(Note 2)PartialScanningDRAFT MultiROILVALSync/AsyncAuto Irisoutput(Note 4)0x00 Continuous Yes Yes Yes Yes No --- Yes0x01Edge Pre-select(PS)Yes Yes Yes No Yes Auto No0x02Pulse WidthControl(PW)Notapplicable Yes Yes No Yes Auto No0x04 RCT Yes Yes Yes No Yes Async Yes0x05 SmearlessEPS（Note3） Yes Yes Yes No Yes Async No0x09 SequentialEPS Yes Yes Yes No No Async No0x17DelayedReadoutEPSYes Yes Yes No Yes Auto No0x18DelayedReadoutPWCYes Yes Yes No Yes Auto NoNote 1: Write ID in register address 0xA040 in order to set trigger mode.Note 2: Vertical Binning is available only for BM-141GE.Note 3: Smearless EPS modes suppress the smear on the upper part of the image.Note 4: The Auto iris output is only effective on Normal scan and Vertical binning modes. It isnot available on the partial scan mode and Draft mode.ROI1ROI2ROI3ROI4ROI5
