BM-500GE / BB-500GE54Note: The menu for ON or OFF of OB transfer mode is found on the Image Format Control ofJAI SDK Camera Control Tool.10.2.8 Multi ROI mode (Multi Region of Interest)On the trigger mode, the maximum 5 ROIs located on theone image can be output by one trigger input. By usingthis mode, the data stream can be smaller.Each ROI can be overlapped.10.3. Operation Mode and Functions matrixModeShutterPreset /Program.VerticalBinning(Note 2)PartialScanningMultiROILVAL Sync/AsyncAuto Irisoutput(Note 4)Continuous Yes Yes Yes No --- YesPre-select(PS) Yes Yes Yes Yes Auto NoPulse Width(PW)Notapplicable Yes Yes Yes Auto NoSequentialPre-select(PS)Yes Yes Yes No Async NoPSDelayedReadoutYes Yes Yes Yes Auto NoNote 1: Write ID in register address 0xA040 in order to set trigger mode.Note 2: Vertical Binning is available for only BM-500GE.Note 3: Draft mode is available only in BB-500GE.Note 4: The Auto iris output is only effective on Normal scan and Vertical binning modes. It isnot available on the partial scan mode and Draft mode.ROI1ROI2ROI3ROI4ROI5
