JAI GO-5000M-PGE User Manual

Also see for GO-5000C-PGE: User manual

Contents

JAI GO-5000M-PGE User Manual Manual pdf 16 page image

GO-5000M-PGE / GO-5000C-PGE- 14 -5.4 JAI SDK and Control Tool softwareThe GO-5000M-PGE and GO-5000C-PGE are designed to use the JAI SDK and Control Tool software tocontrol camera functions. All controllable functions are stored in the camera’s XML file. The JAI SDKcan be downloaded from www.jai.com. Third-party software can also be used with the cameraprovided it is compliant with the GenICam® standard.5.5 Cables to be usedGigEVision configures the system by using 1000BASE-T.In the market, CAT5e (125MHz), CAT6 (250MHz) and CAT7 (600MHz) cables are available for1000BASE-T. There are crossover cables and straight through cables available. Currently, as mostequipment complies with Auto MDI/MDI-X, please use straight through cables. (Among crossovercables, a half crossover type exists, which the Ethernet will recognize as 100BASE-T).The GO-5000-PGE also has PoE (Power Over Ethernet) capability and DC power is supplied throughLAN cable.5.6 DC IN / Trigger INThe GO-5000-PGE supports a PoE (Power over Ethernet) function which complies with IEEE 802.3af.Therefore, the Gigabit Ethernet interface card used in the PC needs to have this capability too.However, if the Gigabit Ethernet network card does not have this capability, GO-5000-PGE providesa 6P connector to receive +12 to +24V DC to operate the camera. The 6P connector is also used toprovide external trigger input.5.7 Camera Default SettingsWhen the camera is connected to a PC and JAI SDK 2.0 is started up, an XML file which stores defaultsettings of the camera is downloaded to the JAI_SDK camera control tool.The default settings of the GO-5000-PGE are as follows.Table – 2 Default settingsImage Format Bit allocation 8-bitHeight 2048Binning Horizontal (Note) OFFBinning Vertical (Note) OFFTrigger Operation Trigger Mode OFFExposure Control Exposure Mode OFFGain Gain Auto OFFManual Gain all 0Manual Fine Gain all 0Analogue Base Gain 0dBNote: GO-5000M-PGE only.