JAI SP-12000M-CXP4 User Manual

Contents

JAI SP-12000M-CXP4 User Manual Manual pdf 56 page image

— 56 —SP-12000M-CXP4 / SP-12000C-CXP4MiscellaneousTroubleshootingCheck the following before requesting help. If the problem persists, contact your local JAI distributor.■ Power supply and connectionsProblem Cause and solutionThe POWER / TRIG LED remains lit amber anddoes not turn green, even after power issupplied to the camera.Camera initialization may not be complete due to lack of aCXP connection. Check the CXP cable conection.■ Image displayProblem Cause and solutionGradation in dark areas is not noticeable. Use the gamma function to correct the display.As the light-emitting properties of the monitor are not linear,the entire image may be darker or the gradation in the darkareas may be less noticeable when camera outputs aredisplayed without processing. Using the gamma functionperforms correction to produce a display that is close tolinear.For details, see “Gamma Function” (page 38).■ Settings and operationsProblem Cause and solutionSettings cannot be saved to user memory. You cannot save to user memory while images are beingacquired by the camera. Stop image acquisition beforeperforming the save operation.I want to restore the factory default settings. Load [Default] under [User Set Selector] in the [FeatureProperties] tab to restore the factory default settings.